On this page, we will walk you through changing the oil and filters on an Edwards nES100 single-stage, oil-sealed rotary vane vacuum pump. You will learn how to drain the oil, remove the oil and exhaust filters, clean the relevant components and reassemble the pump.
Are you searching for tools and kits?
Follow safety guidelines
- Switch off the power supply to the pump system before beginning any maintenance.
- Allow the vacuum pump to cool to a safe temperature. This usually takes approximately one hour.
- Refer to the instruction manual for the recommended oil type and oil filter.
- Follow all applicable safety instructions and local maintenance procedures.
Tools and materials required
| Tools: |
1. Oil collection tray (min. 1.5 L capacity) |
2. Strap wrench (for oil filter removal) |
3. Clean cloth |
4. Vacuum grease |
5. Oil filter and exhaust filter |
6. Fresh oil |
7. Syringe |
8. Hose and drain valve |
Proceed for more support and the full service video
Unlock valuable insights about our product by filling out our quick and easy form. Gain instant access to vacuum pump service recommendations and a step-by-step process of how to maintain your vacuum pump.
