IDX 1300 Dry Screw Vacuum Pump - Brochure
IDX Dry Screw Vacuum Pumps
Fast pumpdown and high capacity pumping for industrial processes
Double-ended screw technology for metallurgy, coating and degassing
The Edwards IDX vacuum pump is designed to reduce your energy costs, eliminate effluent and offer significant improvements in product quality, making the range ideal for many degassing, coating and metallurgy processes.
Maximum pumpdown for large chambers
The IDX enables you to reach target pressures quickly with a bigger throughput capacity for higher gas loads at low pressure.
Improved performance and reliability
The IDX has a rugged industrial mechanism for reliable, repeatable performance. A key feature is faster pumpdown from atmosphere to ultimate vacuum, while managing higher throughput at low pressures. Efficiency delivers lower operational costs too.
Environmentally friendly
Designed to help you improve sustainable productivity, the IDX efficiency eliminates effluent, helping to improve your overall environmental impact.
Ease of Maintenance
The IDX is designed for easy access so that you can conduct your own routine maintenance on site, including oil filter change, bearings and seals.
Systemisation customised to meet your needs
The IDX comes equipped with standard accessory modules and is available in a range of standard packages to suit your precise requirements, with mechanical boosters to give capacities up to 30,000 m3/hr. You can also configure the IDX with exhausting booster stages for rapid pump down.
NHẬN DỊCH VỤ BƠM CỦA BẠN TỪ CÁC CHUYÊN GIA
Khám phá các dịch vụ của chúng tôi
Từ sửa chữa chuyên nghiệp đến các kế hoạch dịch vụ thông minh, phụ tùng chính hãng, chẩn đoán từ xa và thậm chí mua lại - dịch vụ chăm sóc chân không toàn diện của chúng tôi giúp hệ thống của bạn hoạt động tốt nhất.
- Chemical applications knowledge you can trust
- Technical specifications
- Downloads
Patented stator machining with integral head plate
- Improved tolerances give better pumping efficiency
- No compression plate provides better dust and liquid handling
Indirect cooling circuit
- Good thermal control, for improved reliability
- Enables use of poor quality cooling water
- Ensures even temperature distribution along the pump, eliminating hot and cold spots
| Units | IDX1300 | |
| Peak pumping speed | m3/hr (cfm) | 1200 (706) |
| Ultimate pressure | mbar (torr) | 0.05 (0.04) |
| Maximum back pressure | mbar (kW) | 1050 (30) |
| Motor power | kW (hp) | 30 (40) |
| Cooling water minimum flow | l/min | 10 |
| Cooling water supply temperature range | °C | 5-35 |
| Cooling water supply pressure | bar | 10 |
| Pure gas supply pressure | bar | 2-10 |
| Regulated pressure to shaft seals | bar | 0.3-0.5 |
| Noise (maximum with exhaust silencer) | dB | 82 |
| Weight (without motor) | kg | 1650 |
| Pump inlet | 150 DN PN16 / 6" ANSI | |
| Pump outlet | 80 DN PN16 / 3" ANSI |
