Your browser is not supported

Está a utilizar um navegador que já não é suportado. Para continuar a visitar o nosso website, escolha um dos seguintes navegadores suportados.

Search Edwards Vacuum
  1. ...
    • Semiconductor
    • Knowledge Hub
    • Centro de inovação
    • Semiconductor Fab recovers more than 1,400 hours of process tool time

    Semiconductor Fab recovers more than 1,400 hours of process tool time

    Wafer

    The value of a single leading-edge semiconductor wafer is estimated at $17,000*. Downtime on one process tool alone can interrupt production and rapidly cause setbacks in wafer output, yield and cycle time. Maximum process tool uptime is critical to profitability.

    With limited insight into the performance of the vacuum and abatement system, and its impact on process tool availability, this Fab had to operate under a time-based maintenance approach.

    Determined only by the age and run time of SubFab equipment, time-based maintenance couldn’t completely eliminate the risk of a down event. Large inventory of spare parts had to be readily available, putting additional pressure on supply chains. Also, unexpected demands were made on maintenance teams to provide additional service support.

    Corrective maintenance takes more time

    In an event where the vacuum and abatement system shuts down unexpectantly, the cleaning, recovery, re-qualification of the process tool was estimated to be at least 500 hours of tool time each year. This figure was calculated across 75 process tools; each requiring 6-7 hours of additional maintenance per unexpected stop.

    Managing the risk of downtime

    Time based maintenance wasn’t enough, if the Fab wanted to meet growth and performance targets.  Unexpected downtime needed to be avoided at all costs but without enough insight to quickly identify root causes of system issues, increased routine maintenance was the only option.

    The Fab was challenged to deploy the right technical expertise in the SubFab, and as a result frustration between the Cleanroom and SubFab teams grew, leading to inconsistent communication and a lack of data sharing.

     6-7 hours of additional maintenance per down event: Corrective Maintenance = 18 Hours vs Planned Maintenance = 11.5 Hours

    In search of a more effective and accurate method to eliminate the risk of down events, this facility enlisted our help.

    *Source: Centre for Security and Technology (CSET) REPORT, 2020

    Cover image of e-book on edwards vacuum success story of 1400 hours process tool time saved

    Download this success story to see how this Fab increased process tool efficiency through better use of operations in the SubFab.

    Download the full use case as an interactive e-book or PDF

    INSCREVA-SE

    Deseja receber atualizações por e-mail?