How to replace an active inverted magnetron and/or wide range gauge tube
Replacing the gauge tube on your Edwards Active Inverted Magnetron (AIM) or Wide Range Gauge (WRG) does not have to be complicated. We will take you through the process of replacing the AIM or WRG gauge tube, so that you can get back to business.
Wondering when to replace the gauge tube? It's a simple decision
- If the gauge tube is broken or contaminated.
- If atmospheric or vacuum adjustment cannot be achieved (WRG200 only).
- If the Pirani or striker filaments are damaged (WRG200 only).
At Edwards, we prioritize precision, reliability, and ease of use, ensuring that our gauges deliver optimal performance when you need it most. Explore our innovative gauge solutions today to elevate your measurement capabilities to new heights.
Find a step-by-step video on the gauge exchange process here:
What you should know before you replace a gauge tube
Before we begin, make sure that you have the correct tools in an accessible area. For this service, you will need:
- A replacement Active Inverted Magnetron gauge tube or Wide Range Guage gauge tube (depending on the type of service you are completing).
- The Retaining Clip Release tool.
We walk you through step by step process of changing your gauge tube for the Active Inverted Magnetron and/or Wide Range Gauge.
Step 1: Locate The Retaining Clip
Identify the retaining clip for the gauge tube. It’s typically positioned near the top of the appliance. This clip holds the gauge tube in place and must be partially removed before replacing the gauge tube.
Step 2: The Retaining Clip Release Tool
With your Retaining Clip Release Tool in hand, carefully insert it into the retaining clip. The tool is designed to release the clip without damaging it or the appliance. Be gentle as you work to avoid any unnecessary stress on the clip.
Step 3: Releasing the Clip
Once the release tool is inserted, gently manipulate it to release the retaining clip. This may involve some slight maneuvering, so be patient and don’t force it. When done correctly, the clip will loosen, allowing you to remove the gauge tube.
Step 4: Remove the old gauge tube
With the retaining clip released you can now remove the old gauge tube from its housing. Carefully slide it out and set it aside. Make sure to dispose of it properly, according to your local regulations.
Step: 5 Install the new gauge tube
Take your replacement gauge tube and insert it into the housing. Ensure that it’s securely in place and properly aligned. Once the new tube is in position, make sure to lock it back into place by pressing the retaining clip. This step ensure that the tube stays firmly in place during operation.
Step 6: Clean-up and maintenance
Dispose of the old gauge tube properly and remember to store your Retaining Clip Release tool in a safe place for future use. Check the gauge tube to make sure that it is securely in place before using your AIM or WRG.
By following these instructions, you can successfully replace the gauge tube in your appliance.