EDS Chemical Dry Screw Vacuum Pumps - Brochure
EDS Chemical Dry Screw Vacuum Pumps
Clean, energy-efficient vacuum solutions for chemical process industries
Latest screw technology for effluent-free vacuum for the chemical, pharmaceutical and petrochemical industries
The EDS Dry Screw chemical vacuum pump with its strong focus on the fine chemical and pharmaceutical markets serves a wide range of chemical applications. Available with minimum setup and configurable options available when required to suit specific chemical processes. The EDS chemical vacuum pump is able to handle increasingly complex chemicals, solvents and compounds safely at a low cost of ownership.
Extra performance to meet modern day technologies
The EDS chemical vacuum pump is fast – offering higher pumping speeds, quick pump-down times and higher throughput for your application.
Built for challenging chemical installations
The high IP ratings offer protection in sensitive chemical applications and can be easily configured for hazardous area installations.
ATEX compliant vacuum pumps
Designed to be capable of handling gases from a potentially explosive atmosphere and certified under the ATEX directive 2014/34/EU. With global compliance in mind the EDS series chemical vacuum pumps are flexible to adapt to all global explosion proof standards.
Flexible with multiple options available
Direct and Indirect shell and tube heat exchanger cooling options available. Bare-shaft variants available for flexibility to meet any global Ex Proof standards.
Watch these videos to know more about our EDS Dry Screw Vacuum Pump
EDS vacuum pump for chemical applications
EDS dry screw pumps offer reliable and robust vacuum to chemical applications.
Intricate engineering – A look inside the EDS vacuum pump
A look inside of our EDS dry vacuum pumps, our vacuum solution for chemical applications.
- Applications
- Technical specifications
- Downloads
The EDS range is suitable for a wide range of chemical applications including:
- Lithium Ion batteries
- Distillation applications
- Solar crystal pulling
- Fine Chemicals
- Pharmaceuticals
- Petrochemicals
- Flammable & corrosive gases
- Degassing
- Dewatering & Filtration
- Polymers & Plastics production
| Metric | ||||
| Chemical | ||||
| 200 | 300 | |||
| Performance | Peak Pumping Speed | m3h-1 | 210 | >280 |
| Ultimate Pressure | mbar | <0.05 | <0.01 | |
| Full Load Power | @ ultimate pressure | kW | 4.1 | 4.5 |
| @ peak pumping load | kW | 6.4 | 8.2 | |
| Vacuum Connections | Inlet connection | DIN80/3"ANSI | ||
| Exhaust connection | DIN50/2"ANSI | |||
| Cooling Water | Connection | G1/2" female |
||
| Flow | L/min-1 | <8 | ||
| Supply pressure (max) | bar | 7 | ||
| DP across pump (min) | bar | 0.5 | ||
| Temperature | oC | 5-40 | ||
| Purge Gas | Connection | G1/4” female threads | ||
| Pressure | bar | 2.5-6.9 | ||
| SSP flow | lmin-1 | <12 | ||
| Gas Ballast flow* | lmin-1 | 0-50 | ||
| Operating data | Noise | dB(A) | <71 | |
| Operating Temperature | oC | -20 to +40 | ||
| Exhaust Back Pressure (Max)** | mbar | 1200 | ||
| System IP rating | IP54 | |||
| Lubrication (as supplied) | Extend 110 | |||
| Imperial | ||
| Chemical | ||
| 200 | 300 | |
| CFM | 124 | >165 |
| Torr | <0.04 | <0.008 |
| hp | 5.5 | 6 |
| hp | 8.6 | 11 |
| DIN80/3" ANSI | ||
| DIN50/2" ANSI | ||
| G1/2" female | ||
| Gal/min-1 | <2.1 | |
| psig | 100 | |
| psig | 7.25 | |
| oF |
41-104 | |
| G1/4” female threads | ||
| psig | 36-100 | |
| lmin-1 | <12 | |
| lmin-1 | 0-50 | |
| dB(A) | <76 | |
| oF | -4 to +104 | |
| psia | 17.4 | |
| IP54 | ||
| Extend 110 | ||
