The EDS Dry Screw chemical vacuum pump with its strong focus on the fine chemical and pharmaceutical markets serves a wide range of chemical applications. Available with minimum setup and configurable options available when required to suit specific chemical processes. The EDS chemical vacuum pump is able to handle increasingly complex chemicals, solvents and compounds safely at a low cost of ownership.
The EDS chemical vacuum pump is fast – offering higher pumping speeds, quick pump-down times and higher throughput for your application.
The high IP ratings offer protection in sensitive chemical applications and can be easily configured for hazardous area installations.
Designed to be capable of handling gases from a potentially explosive atmosphere and certified under the ATEX directive 2014/34/EU. With global compliance in mind the EDS series chemical vacuum pumps are flexible to adapt to all global explosion proof standards.
Direct and Indirect shell and tube heat exchanger cooling options available. Bare-shaft variants available for flexibility to meet any global Ex Proof standards.
EDS dry screw pumps offer reliable and robust vacuum to chemical applications.
A look inside of our EDS dry vacuum pumps, our vacuum solution for chemical applications.
The EDS range is suitable for a wide range of chemical applications including:
| Metric | ||||
| Chemical | ||||
| 200 | 300 | |||
| Performance | Peak Pumping Speed | m3h-1 | 210 | >280 |
| Ultimate Pressure | mbar | <0.05 | <0.01 | |
| Full Load Power | @ ultimate pressure | kW | 4.1 | 4.5 |
| @ peak pumping load | kW | 6.4 | 8.2 | |
| Vacuum Connections | Inlet connection | DIN80/3"ANSI | ||
| Exhaust connection | DIN50/2"ANSI | |||
| Cooling Water | Connection | G1/2" female |
||
| Flow | L/min-1 | <8 | ||
| Supply pressure (max) | bar | 7 | ||
| DP across pump (min) | bar | 0.5 | ||
| Temperature | oC | 5-40 | ||
| Purge Gas | Connection | G1/4” female threads | ||
| Pressure | bar | 2.5-6.9 | ||
| SSP flow | lmin-1 | <12 | ||
| Gas Ballast flow* | lmin-1 | 0-50 | ||
| Operating data | Noise | dB(A) | <76 | |
| Operating Temperature | oC | -20 to +40 | ||
| Exhaust Back Pressure (Max)** | mbar | 1200 | ||
| System IP rating | IP54 | |||
| Lubrication (as supplied) | Extend 110 | |||
| Imperial | ||
| Chemical | ||
| 200 | 300 | |
| CFM | 124 | >165 |
| Torr | <0.04 | <0.008 |
| hp | 5.5 | 6 |
| hp | 8.6 | 11 |
| DIN80/3" ANSI | ||
| DIN50/2" ANSI | ||
| G1/2" female | ||
| Gal/min-1 | <2.1 | |
| psig | 100 | |
| psig | 7.25 | |
| oF |
41-104 | |
| G1/4” female threads | ||
| psig | 36-100 | |
| lmin-1 | <12 | |
| lmin-1 | 0-50 | |
| dB(A) | <76 | |
| oF | -4 to +104 | |
| psia | 17.4 | |
| IP54 | ||
| Extend 110 | ||
